If you want know about iOttie HLCRIO161 Car USB Charger Reviews and Assessments kindly read the article below. for more information check Reviews on iOttie HLCRIO161, Products description, Pros and Cons of iOttie HLCRIO161 and Features of iOttie HLCRIO161.

Introduction

An automated opening of the wireless charger’s arms is made possible by a proximity sensor built into the iOttie Auto Sense Wireless Automatic Clamping Mount’s design. However, The arms quickly close while holding the phone in place when it has been inserted into the charger. Also, With its adjustable foot knob Feature, the iOttie wireless charger can fit phones of different lengths. The built-in USB-C cable on the iOttie can also be detached to charge devices other than smartphones but can use the USB-A port to charge gadgets too.

iOttite has incredible abilities but it’s not the one to recommend because it was the slowest charger we tested. it took five hours to fully charge my smartphone. However, We think that since it can fully charge drained iPhone batteries in about two hours and five minutes. that means it can do the same for Android smartphones. Tablets could take a little bit longer, but not significantly. The circuitry is gold-plated, which lowers heat generation and speeds up charging. It is made of a sturdy metal casing. If you notice that mounting a wireless charger on your vehicle’s vents is challenging due to their layout or location. Try mounting it on the windscreen or dashboard instead. 

More information about the product

Moreover, The dashboard pad and sticky suction cup in this iOttie model work together to enable quick and simple attachment to a variety of flat or slightly curved surfaces. Also, When mounting this product on your windscreen, it is simple to attach and detach when necessary. Moreover, If the suction cup becomes dusty, a fast cleaning will restore the adhesive surface. Be aware that the dashboard pad is different because once it’s fixed, it cannot be removed. If you find the windscreen and dashboard variant to be inconvenient. The company also produces a vent-mounted version that fits in your car cup holder.

The power output of the Qi wireless car charger may reach up to 10W for Android devices. However, it’s 7.5W for iPhones. It also includes a micro-USB cable to link the two and a suitable USB charger to put into the vehicle accessory port. Also, If you require electricity for a gadget that isn’t compatible with wireless charging, you can use the USB charger.

What the products does

The iOttie Auto Sense, as the name implies, senses, when you hold your phone, nearby. and automatically clamps onto the sides to stabilize it and begin charging. With a fast tap of one of the release buttons on the side. you may quickly obtain your phone when you arrive at your location. 

The “foot” of the charger, which aids in maintaining the phone’s stability, may be set in one of three settings to accommodate different phone sizes. Despite the brand of car you drive,  keeping your phone in sight shouldn’t be an issue. because the telescopic arm transitions through 225 degrees and extends about 3.5 inches.

Finally, The pricing somewhat reflects the fact that this is a high-quality and long-lasting wireless car charger. But if you don’t mind spending a little more on quality, this is a great option.

Specs

1  it has 10 watts

2 It comes in Ports One USB A Port, an Integrated USB C cable, Qi Wireless charging

3 it’s slow in charging

4 The Brand name is called IOttie

5 Connector Type is Wireless

6 it’s compatible with Smartphones

7 The compatibility is universal 

8 The features include a Dual Charger, a Phone Mount, a Reflective Sticker, and a Dashboard Pad.

9 it allows Wireless Charging

10 The Input Voltage is 9 Volts

11 Number of Items,:1

12 it’s Output Current is 10 Amps

Features 

1 it has a Motion-detecting technology that opens and closes the mount automatically for safe phone installation.

2 There is Wireless technology that is Qi-approved which allows phones to be charged without the use of wires.

3 in terms of viewing and location the newly created telescopic arm extends from 4.9″ to 8.3″ and pivots on a 225° arc. providing several advantageous settings.

4 it has a Superior stick strength that combines a single-use dashboard disc and a retractable suction cup.

From the manufacturer 

The ability of iOttie Auto Sense Cup Holder to make your road trips safe and convenient Makes it perfect to use while traveling. To keep your phone accessible but unobtrusive, the mount is designed to fit into almost any cup holder. Additionally, a proximity sensor that can identify a smartphone up to 7 inches away is built inside this device. The arms will then automatically open and close as a result of this. Once it is safe to do so, Qi wireless charging technology begins to charge your phone. 

Also, you can be sure that your setup will be simplified because of a wire management system that is tucked away inside the cup holder base.

Backup Power

For extra convenience, the internal battery keeps charging even when the device is unplugged.

Twist Dial Cup Holder

It Installs safely and has a built-in cable management system that is concealed inside the cap.

Things Included in the Box

it comes with an Auto Sense Mount, Dual USB Car Charger, Cup Holder, and a Reflective Sticker.

Product Description 

An Advanced automatic wireless charging car mount called the Auto sense was created to maximize power and comfort while driving. The Auto-detect component, which is driven by a proximity sensor and a servo motor, makes mounting smartphones simple. If you want to mount your phone, all you need to do is simple. Gently bring the phone close to the sensor and the arms will automatically close to secure the device. 

Also, The Qi wireless charging technology powers the smartphone instantly once it is fixed in the durable cradle without the use of additional charging wires. Moreover, By just clicking the release buttons on the side, the arms open automatically. allowing for simple release and retrieval of devices. 

Furthermore, The powerful suction cup that attaches to your dashboard. or windshield for increased adaptability makes it simple to set up and adjust the auto-sense phone mount. Experiencing safe and comfortable driving is possible when you use the Auto sense mount from iOttie.

Pros

1 you can unplug the USB-C cord from the cradle.

2 it’s a Car charger with a USB-A port

3 it has Auto-sensing arms

4 dependable and stable grip

5 10W maximum wireless charging

6 Closes automatically

7 it Comes with a USB car charger

Cons

1 Extremely slow charging 

2 A premium price is charged for a premium model. 

3 The dashboard pad cannot be moved once it has been installed.

Customers’ Questions and Answers

What charging requirements does Auto Sense have?

The specifications of the charger, which use a typical USB charger and cable, are listed as 3 possible output levels. The output levels are as follows: 5V 3A, 9V 2A, and 12V 1.5A. The above was listed in the documentation link supplied in the post. As a result, it is incompatible with fast Qi charging. Because the holder cannot be connected to a USB C charging cable. I’ll hold off until a new upgrade is done.

After plugging it in, auto sensing only functions once before ceasing entirely unless you unplug and replug. What the heck?

Simply load your phone into the mount. I know it’s challenging to release the phone by pressing a button. but I promise you’ll get used to it.

If the automatic detector doesn’t function on a specific case or phone, does the open button shut the mount?

I know that when a mobile device approaches the mount and starts to move, the mount opens. This happens whether it finds a mobile phone case or not, it automatically closes after a couple of seconds.

How long is the USB cable in terms of Feet or inches?

It should be around 3 feet

Top reviews 

Bruce 

Even though this product is a bit costly compared to other mounts. I still consider it one of the best in terms of quality. Moreover, I chose a mount with integrated wireless charging for the first time. and I was happy with my choice. The product I’m using is the dashboard and windshield mounting model.

It can be annoying, to say the least when trying to use your phone while driving on rougher roads. because other mounts of this style that I have used in the past typically end up having some free play in the suction cup base. Or even in the pivoting joints that let the phone and the whole arm flop and bounce around a bit.

Karl 

First, I just found out that the ring that tightens against the knob that holds the phone mount’s angle had a crack 5 months after I purchased this mount. Therefore I’ve asked for a replacement. I’ll include a description of the warranty experience to my review. The mount has been excellent except for this one issue mentioned in my first paragraph.

The phone sensor port is designed to operate best with shiny surfaces. however, if the texture of your phone cover is too matte for the sensor to detect. clear glossy stickers are provided to attach to the back of your case. Even though my Otterbox Defender case is very rough and uneven, the mount has yet to stop detecting the phone.

For Android phones, the wireless charger delivers 10 watts, while iPhones receive 7.5 watts. Most wireless chargers will default to standard speed rather than high speed. if a phone case is too thick, it may prevent the phone from charging. Even though my Otterbox case is about as thick as they come, my phone is quick to charge.

My experience

Ever Since I came across this mount, I haven’t had a phone wiggle lose. because the grip is strong enough to keep it in place. However, A disc with an adhesive sticker on the bottom and a smooth top for the suction cup to grab is provided for dash mounting. The suction cup mount has a sticky variety and will remain stagnant on the windshield.

The micro USB connection from the 12v connector to the head of the mount is kept in by nothing more than friction. So it could come undone. Hence, I would urge caution in this region. It felt like the unit was not getting power at first. so I had to check that it was truly plugged all the way in. I haven’t experienced any issues after then. Generally, I adore this mount and strongly suggest it.

Brad

The previous mount I used to hold my apple phone was disappointing. But when I upgraded to a higher version of my apple phone (13pro max). There was a need to mount an upgrade as well. At first, I mounted it where I thought was the best place to. Just to find out I got it all wrong by just an inch. When I discovered I made a mistake I tried to remove it but it was hard. I had to use a single-strand wire. It helped it to lift it enough to put a plastic trim pry bar under it to lift it. This was how I got rid of it. The adhesive tape they use is commendable and I’ll love to know more about it later.

 Let’s talk about the suction system. After being on for a few days, it was difficult to release this once more. I have never encountered a suction cup that is as sticky. Since the Tech 21 case is already quite reflective, I did not need to utilize the reflective tape they provide. Also, I discovered that the phone is held firmly and effectively by the motorized arms. I’m pleased that the unit charges without a hitch via the case.

my experience

The only issue I have about the unit is the motorized gripping arms. I wish they ran prototype units though 10,000 plus open and close cycles to prove its durability.

If it was in power to give this more than I give star rating I would. And having access to the vent again is fantastic!

Molina

I wanted one this product for my MK4 golf. I felt I would experience my phone falling  out, wobbled, or would bend or break my air vent. because it didn’t fit well. This fits in the cup holder and is out of the way of the windscreen, so there won’t be any unsightly scratches on the windscreen. The auto connect feature works excellent; it opens when the phone is close by and shuts when the phone is in the holder.

If your phone doesn’t support wireless charging, you can utilize the additional USB connector on the provided cigarette adapter. It is a bit pricey, and I would have preferred if it weren’t built into the holder for cigarettes. You could just use a cigarette adaptor and a USB micro cord since it is a micro USB connector. 

The cable management in the cup is a great, tidy solution to get rid of extra cabling so it doesn’t interfere with or obstruct the movement of the gear stick. Overall, I’m pleased with this. It works and after having so many poor phone holders to have a nice one is worth the littleextra money.

Key phrases

1. Reviews on iOttie HLCRIO161

2. Products description

3. Pros and Cons of iOttie HLCRIO161 

4. Features Of iOttie HLCRIO161

Category: Car Accessories

Interior Car Accessories

Car USB Charger

See also: https://www.amazon.com/dp/B07RBC21Z6?tag=toomanada- 20&linkCode=ogi&th=1