303 Touchless Sealant Reviews/ Assessment

This write-up on 303 Touchless Sealant reviews/ assessment will enlighten you on the product details of this product. You can check also for Reviews on 303 Touchless Sealant, Products description, Usage direction of 303 Touchless Sealant, Advantages of 303 Touchless Sealant.

Product Details

Offers improved water beading. Safeguards against paint fading. Has the capacity to last way longer than traditional wax. Easy to use as you will simply spray and rinse off. It’s also safe to use on windshields and wheels. Plus, it comes in a 473ml bottle.

The 303 Touchless Sealant will save you time if you have difficulties fully waxing your car. This stands as a totally touchless alternative to wax your car as you would just spray on and rinse. Saves you hours in the garage by giving the same water beading protection that you get from full wax. In addition, it’s safe for clear coat, gel coat, fiberglass, plastic, windshields, and wheels as well.

Usage Directions

You should wash your car while surface is still cool and out of direct sunlight. Then, evenly spray a little amount of product on the surface and treat one part of vehicle at a time. Once you are done, rinse off immediately and you will know it’s protected once you see water beading on surface. Do same to all parts of the vehicle and dry thoroughly with a waffle weave drying towel or microfiber towel.

Variety of surfaces it is safe to use on based on 303 Touchless Sealant Reviews/ Assessment include;

Paint, clear coat, wheels, glass, plastics, fiberglass, gel-coat, aluminum, hard plexiglass, and more.

Advantages Of The 303 Touchless Sealant

Gives enhanced water beading. Insures against paint fading. Reliable as it lasts 2× longer than the traditional wax. Easy to use as you simply spray a light mist and rinse off. It’s also safe to use on surfaces like windshields and wheels. Provides glass and paint with a deep, clean shine. Water runs off the paint easily as a result of the enhanced water beading.

Manufacturer Information

Waxing your car is a very long and tedious process that 303 totally understands. Therefore, our brand new 303 Si02 Touchless Sealant provides you with an easier way to preserve and protect your car. Water repellency and durability is aided by hydrophobic components. The product is able to bond to all exterior surfaces due to Si02 based chemistry.

In addition, your car is protected from water spots, dirt or other contamination. Does not require any buffing as it is water-activated. Plus, it is very easy to use as light mist is sprayed on and simply rinsed off.

Product Description

This product is perfect for you if you have issues waxing your vehicle. The 303 Touchless Sealant saves you a lot of stress as you are to simply spray on and rinse off. Offers the same water beading protection that is gotten from full wax. Plus, it’s safe to use on surfaces like clear coat, fiberglass, windshields, wheels, and others.

FAQs

What is 303 Touchless Sealant chemically?

It can be regarded as magic in a bottle. Basically, liquefied glass as Si0 chemistry was incorporated and modified. Water repellency and durability is aided by a hydrophobic component added to it. Plus, it is capable of bonding to various exterior surface as a result of the synergy of chemistry.

On which surfaces can I use 303 Touchless Sealant?

Due to the Si02 based chemistry, it can be applied to any vehicle exterior surface. It’s safe and can be used on paint, clear coat, wheels, glass, plastic, fiberglass, gel-coat, aluminum, hard pixelglass and more.

How do I make use of 303 Touchless Sealant?

Make sure to wash it while the surface is wet and out of direct sunlight. Then, only a light mist of product should be sprayed on and immediately rinse off. Treat one part of the vehicle at a time and you will know it’s protected once you see water beading on the surface. Repeat on all parts of the vehicle and dry thoroughly with a waffle weave drying towel or microfiber towel. If you don’t rinse off thoroughly or use too much of product, water spots will appear.

How do I remove water spots that might occur after I use 303 Touchless Sealant?

Water spots might occur in various occasions. If it occurs because you used the product on hot surface, then you will have to rinse the surface again. Then, use a microfiber towel to buff this off.

When water spots occur due to too much product sprayed on, not rinsing off thoroughly or quickly after applying. Simply fix this by rinsing the surface off again. Also, after applying product and rinsing off, dry your vehicle with a drying towel. Allowing it to air dry can also make water spots occur.

Can 303 Touchless Sealant be used as a layering product?

Of course, it can be applied on other paint protection products or as extra top layers on top itself. Generally, we recommend that when layering, you should use the longest lasting product as the base coat. This is because the layers on top of your base coat will only last as long as your base coat.

Can 303 Touchless Sealant be applied on Automotive wax?

As long as the surface is clean, wet and cool to the touch when applied, it can be done.

How long does 303 Touchless Sealant last?

Lasts up to six months

Is 303 Touchless Sealant a ceramic coating?

Though this product contains ceramic coating properties, it’s not exclusively ceramic.

What is the difference between 303 Touchless Sealant and Ceramic coating?

The 303 Touchless Sealant is easy to apply though it contains ceramic properties. Ceramic coating lasts longer but need more prep and are more expensive.

Top Reviews

Robert J. Long

I chose gallons and stopped getting the 32 oz. Bottles. Though it seems like a huge cost but it’s the same with 4 32 oz. Bottles or nearly the price of 3 spray 32 oz. Bottles. The longevity is nice but I use it every wash since I don’t hand dry. I have heard of streaks and I wonder if it were applied per instructions or if cheap soap was used or not rinsed well. Therefore, do not let the negative reviews and complaints get to you.

Airborne

Got introduced to this product by a guy that owns a used car lot. May seem absurd, but mist your vehicle while it is raining and let the rain do the rest. The shine and protection to follow afterwards is superb. Make sure it’s rinsed off totally, you can hose it off if you have to. This is because of the stress you will undergo to get it off if it dries on your vehicle.

Kindle Customer

Easy to use, applied on fiberglass and 3 months later, it is still beading up fine. Plus, I appreciate it protects everything from body to seals to tires and stays cleaner than waxing. Applied it on auto as well and I can say I am very pleased with the results.

Marlin

This product is greatly easy to apply than any other ceramic coating I have used. The beading isn’t as good as full ceramic coat but it’s better than wax. Can’t say anything about the longevity for now though it seems promising. However, due to the easy and fast way of application, I will be switching to this product.

Wep

If you follow the instructions, it’s very easy to use and it tends to last for a while. I don’t know if it’s better than wax since I use it on my dark grey Subaru. Used this bottle to refill my original spray bottle.

Products Assessment